Stainless steel chrome highly contained (Cr) and nickel (Ni) due to atmospheric conditions, water, acids, and the environment of high temperature resistant malzemelerdir.b is added to the stainless steel outside the two elements copper (Cu), titanium (Ti) as elements in stainless steel very different purposes, giving the attributes to provide the user. Stainless steel, although expensive longevity in terms of price compared to other types of steel, when fully consider all the life of the ürü used with the reason to gain back, material and labor costs are emerging reality is more economical to use terms.

  * Superior corrosion-resistance,
  * Can be used in high and low temperature properties
  * Available in the manufacturing process can be easily used
  * To be the best of high mechanical strength
  * Hygienic purposes features
  * Excellent aesthetic properties
  * Long life and not economic

1-ferritic stainless steels; AISI 409,430,430T of 439.39, 405,442,446
2-martensitic stainless steels; AISI 410, 420, 440, 440c
-Ferritik 3-austenitic stainless steels; 2205, 329
4-austenitic stainless steels; AISI201,301,304, 304,304LN, 309,309S, 310,310S, 316,316L, 316L, 316Ti, 321.347
5-Precipitation Hardening Stainless Steels could afford it; AISI 631.632

  Stainless Steel Chemical Analysis
  Stainless Steel Manufacturing Features
  Standard Operating Properties of Stainless Steel

Our company briefly Stainless Steel Imports and Sales, operates in the field of Construction Contracting.

Buildings
  * Business and Shopping Centers, Administrative Building,
  * Hospitals, Public Houses, Holiday Villages
  * Restoration, Landscape and Environmental Design
  * Land Evaluation Projects, Residential Construction, Warehouse and Warehouse Buildings
 
  Industrial Plants
  * Plants, Waste Water & Drinking Water Treatment Plants

  Infrastructure Works
  * Pipelines and Pump Stations Water tanks, sulama_tesis of
  * Rehabilitation of Infrastructure
  * Landscaping
  * Clean Water and Waste Water Collectors
 
  Marine Structures
  * Waterfront, breakwaters

  Transportation Structures
  * Roads Projects
  * Roads, Bridges, excavation, filling, Soil Improvement, Stream Improvement
  * Riprap

First, cause corrosion of stainless steel is important to understand that it is so durable. Alloying elements in stainless steel thin, form a transparent passive layer. This protective passive layer, though, although only a few atoms thick, air or occurs again immediately in the presence of oxygen from the water, so that even when the material is drawn, or damage continues to protect against wear this passive layer surface.

This means that even after decades of use or wear protective coating against any reason to remain bright and vibrant stainless steel explain the reason for needing to other substances.

Initial cleaning is usually done before delivery to the building owner. If the stainless steel parts protected in accordance with a simple time of delivery "maintenance cleaning" will probably be enough.

Stainless steel parts manufacturing, usually maintained adhesive plastic film during transport and installation.

Although damage and are excellent protection against pollution Although, some plastic films deteriorate on exposure to ultraviolet radiation in sunlight and peeling from the place may be difficult. The film adhesives can also stick to the stainless steel surface.

Placement / build stage from the moment they do not need to provide protection during the protective plastic films should be removed through the top of the building was started to work downwards.

Mortar and cement stains removable with a solution containing a small amount of phosphoric acid. Water (preferably deionized water) and rinsed and dried. Water stains risk is reduced with deionized water.

Proprietary products are available from specialists finishing companies. Never on the stainless steel mortar removers or diluted hydrochloric acid must not allow you to use. If you rinse them accidentally applied or poured onto the stainless steel with plenty of clean water.

May not always be aware of how dangerous proprietary building mortar removers containing stainless steel components, building contractors and developers of hydrochloric acid. In gerekir.eg attention to the sequence of operations should be changed and, if possible, before they are placed close to the steel components such as skirting boards or stand laying ceramic tiles and cleaning process should be completed.

See or construction steel appliances, scaffolding pipe system, etc. result of contact should be cleaned immediately with the invention of iron scraps.

Building usually due to accumulation of dirt accumulation of rain and the amount of time in outdoor applications such as facades and other residues can be expected to effectively remove by washing.

To ensure that the cleaning of pollutants transported with air during routine cleaning parts to pay attention to protected areas gerekir.b condition is particularly important in marine and industrial environments otherwise, ie airborne chlorides or SOx deposition when not cleaned effectively cause localized wear.

Fingerprints may be a problem with an internal application. Stainless steel is available in a wide range of finishes for steel types, many of them (heavy traffic) is very suitable for use in public places exposed to heavy loads. In the design process, fingerprint reduces labor and the cost of cleaning during the service life of the building is less precise type of surface applied against stains.

A popular choice for interiors of the ground surface types, can be installed immediately after the fingerprints certain, but the visibility of scars it will be less noticeable after the first few cleaning.

Soapy water to remove fingerprints and other stains from the surface type architecture and a mild detergent are usually safe and successful.

Proprietary spray cleaners that combines the ease of cleaning with a thin film layer that provides a smooth and even brightness is available. This leave fingerprints spray cleaners available in a condition that reduces the tendency seen in the next service eliminates fingerprints and faces. After applying the spray need to polish the surface with a dry cloth. Your nearest national stainless steel development agency, can offer advice on products available in your area.

Glass can be cleaned with glass cleaner polished stainless steel. These items must be selected from chloride free.

For more stubborn stains soft cream household cleaners are effective. They are also lightweight and water stains are suitable to remove the color cast by the clear. Remains after cleaning (such as steam irons, or sold in supermarkets for car batteries), preferably (deionized) water and dry with clean lines to prevent water spots. For that you can leave scratches on stainless steel surfaces should not be used types of products scouring powders.

Severe oil and grease stains, with denatured alcohol and isopropyl alcohol, including alcohol-based products or other solvents such as acetone can be removed. These products do not cause corrosion hazard to stainless steel.

Normal dirt or fingerprints, often with a damp cloth or chamois to remove etc are appropriate.

For stubborn dirt, "Scotch Brite" as nylon sponge is usually satisfactory. Non-stainless steel based on the stainless steel scouring pads, cleaning wool and wire brushes should be used. They both can draw both the surface and leave carbon deposits on stainless steel surfaces, even when the surface is wet rust stains may occur later.

Soft nylon brushes can be used for cleaning stainless steel with patterned surface. Non-finished stainless steel wire brush should not be used.

EN 10088-3 G, J and K types in a certain direction, such as "stoned" on the surface, making the cleaning pulse and direction of roughness should be cutting them.

When water is used to clean or rinse, especially when hard water in places, the wipe dry the surface to prevent water stains are recommended. Lime water-related plaque formation can be avoided by using deionized water.

Depending on the iron particles "cross-contamination" to avoid years, before the cleaning materials "ordinary" (ie carbon) must make sure not used in steel. Only the cleaning material to be used on stainless steel components are preferably used for this purpose.

Interiors of buildings used for cleaning stainless steel parts are actually not very different than the other materials. Cleaning the naked eye must be made before a visible dirt or fingerprints accumulation, so that minimized the risk of labor or change the external appearance and cleanliness spent.

In applications other than the building of stainless steel, results in a much wider range of potentially damaging contact with the following may be exposed to media which may include:

Sea air,

Installed in environments with industrial pollutants,

Salt particles from the salt used to melt the ice on the road,

Dirt and pollution in the atmosphere, depending on traffic.

They all cause brown stains. Good practice, stainless steel building windows (windows) is removed with the same frequency. Depending on the severity of the dirt and sediment accumulation, in light pollution in the environment or routine cleaning frequencies listed above is recommended every 3-6 months. Such soil can be removed with a stainless steel cleaner containing phosphoric acid.